[1] Copyright (c) 1992-2017 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 10.4-RELEASE-p7 #0 r331860: Sun Apr 1 18:03:38 BST 2018 [1] root@shrewd.pub.knigma.org:/usr/obj/usr/src/sys/SHREWD amd64 [1] FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 [1] CPU: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (3600.16-MHz K8-class CPU) [1] Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 [1] Features=0xbfebfbff [1] Features2=0x7ffafbff [1] AMD Features=0x2c100800 [1] AMD Features2=0x121 [1] Structured Extended Features=0x29c6fbf [1] XSAVE Features=0xf [1] VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID [1] TSC: P-state invariant, performance statistics [1] real memory = 17179869184 (16384 MB) [1] avail memory = 16466759680 (15703 MB) [1] Event timer "LAPIC" quality 600 [1] ACPI APIC Table: [1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs [1] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads [1] cpu0 (BSP): APIC ID: 0 [1] cpu1 (AP): APIC ID: 1 [1] cpu2 (AP): APIC ID: 2 [1] cpu3 (AP): APIC ID: 3 [1] cpu4 (AP): APIC ID: 4 [1] cpu5 (AP): APIC ID: 5 [1] cpu6 (AP): APIC ID: 6 [1] cpu7 (AP): APIC ID: 7 [1] random: initialized [1] ioapic0 irqs 0-119 on motherboard [1] kbd1 at kbdmux0 [1] cryptosoft0: on motherboard [1] acpi0: on motherboard [1] acpi0: Power Button (fixed) [1] cpu0: on acpi0 [1] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386) [1] ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147) [1] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386) [1] ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147) [1] cpu1: on acpi0 [1] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386) [1] ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147) [1] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160527/utmutex-386) [1] ACPI Error: Could not release AML Interpreter mutex (20160527/exutils-147) [1] cpu2: on acpi0 [1] cpu3: on acpi0 [1] cpu4: on acpi0 [1] cpu5: on acpi0 [1] cpu6: on acpi0 [1] cpu7: on acpi0 [1] hpet0: iomem 0xfed00000-0xfed003ff on acpi0 [1] Timecounter "HPET" frequency 24000000 Hz quality 950 [1] Event timer "HPET" frequency 24000000 Hz quality 550 [1] atrtc0: port 0x70-0x77 irq 8 on acpi0 [1] atrtc0: Warning: Couldn't map I/O. [1] Event timer "RTC" frequency 32768 Hz quality 0 [1] attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 [1] Timecounter "i8254" frequency 1193182 Hz quality 0 [1] Event timer "i8254" frequency 1193182 Hz quality 100 [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 [1] pcib0: port 0xcf8-0xcff on acpi0 [1] pci0: on pcib0 [1] vgapci0: port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 [1] vgapci0: Boot video device [1] xhci0: mem 0xf7230000-0xf723ffff irq 16 at device 20.0 on pci0 [1] xhci0: 32 bytes context size, 64-bit DMA [1] usbus0 on xhci0 [1] pci0: at device 22.0 (no driver attached) [1] ahci0: port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7248000-0xf7249fff,0xf724c000-0xf724c0ff,0xf724b000-0xf724b7ff irq 16 at device 23.0 on pci0 [1] ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported [1] ahcich0: at channel 0 on ahci0 [1] ahcich1: at channel 1 on ahci0 [1] ahcich2: at channel 2 on ahci0 [1] ahcich3: at channel 3 on ahci0 [1] ahcich4: at channel 4 on ahci0 [1] ahcich5: at channel 5 on ahci0 [1] ahciem0: on ahci0 [1] pcib1: irq 18 at device 27.0 on pci0 [1] pci1: on pcib1 [1] pcib2: irq 18 at device 28.0 on pci0 [1] pci2: on pcib2 [1] pcib3: irq 18 at device 28.6 on pci0 [1] pci3: on pcib3 [1] em0: port 0xe000-0xe01f mem 0xf71c0000-0xf71dffff,0xf7100000-0xf717ffff,0xf71e0000-0xf71e3fff irq 18 at device 0.0 on pci3 [1] em0: Using MSIX interrupts with 3 vectors [1] em0: Ethernet address: 68:05:ca:5a:c9:b6 [1] pcib4: irq 19 at device 28.7 on pci0 [1] pci4: on pcib4 [1] em1: port 0xd000-0xd01f mem 0xf70c0000-0xf70dffff,0xf7000000-0xf707ffff,0xf70e0000-0xf70e3fff irq 19 at device 0.0 on pci4 [1] em1: Using MSIX interrupts with 3 vectors [1] em1: Ethernet address: 68:05:ca:5a:cd:46 [1] pcib5: irq 16 at device 29.0 on pci0 [1] pci5: on pcib5 [1] isab0: at device 31.0 on pci0 [1] isa0: on isab0 [1] pci0: at device 31.2 (no driver attached) [1] hdac0: mem 0xf7240000-0xf7243fff,0xf7220000-0xf722ffff irq 16 at device 31.3 on pci0 [1] em2: mem 0xf7200000-0xf721ffff irq 16 at device 31.6 on pci0 [1] em2: Using an MSI interrupt [1] em2: Ethernet address: 2c:4d:54:56:2f:56 [1] acpi_button0: on acpi0 [1] acpi_button1: on acpi0 [1] acpi_tz0: on acpi0 [1] acpi_tz1: on acpi0 [1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 [1] atkbdc0: port 0x60,0x64 irq 1 on acpi0 [1] atkbd0: irq 1 on atkbdc0 [1] kbd0 at atkbd0 [1] atkbd0: [GIANT-LOCKED] [1] orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0 [1] sc0: at flags 0x100 on isa0 [1] sc0: VGA <16 virtual consoles, flags=0x300> [1] vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 [1] ppc0: cannot reserve I/O port range [1] coretemp0: on cpu0 [1] est0: on cpu0 [1] coretemp1: on cpu1 [1] est1: on cpu1 [1] coretemp2: on cpu2 [1] est2: on cpu2 [1] coretemp3: on cpu3 [1] est3: on cpu3 [1] coretemp4: on cpu4 [1] est4: on cpu4 [1] coretemp5: on cpu5 [1] est5: on cpu5 [1] coretemp6: on cpu6 [1] est6: on cpu6 [1] coretemp7: on cpu7 [1] est7: on cpu7 [1] Timecounters tick every 1.000 msec [1] ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to deny, logging disabled [1] DUMMYNET 0 with IPv6 initialized (100409) [1] load_dn_sched dn_sched FQ_PIE loaded [1] load_dn_sched dn_sched PRIO loaded [1] load_dn_sched dn_sched QFQ loaded [1] load_dn_sched dn_sched RR loaded [1] load_dn_sched dn_sched WF2Q+ loaded [1] load_dn_aqm dn_aqm CODEL loaded [1] load_dn_aqm dn_aqm PIE loaded [1] load_dn_sched dn_sched FIFO loaded [1] load_dn_sched dn_sched FQ_CODEL loaded [1] hdacc0: at cad 0 on hdac0 [1] hdaa0: at nid 1 on hdacc0 [1] pcm0: at nid 20 and 21,24 on hdaa0 [1] pcm1: at nid 26 and 25 on hdaa0 [1] pcm2: at nid 27 on hdaa0 [1] pcm3: at nid 17 on hdaa0 [1] hdacc1: at cad 2 on hdac0 [1] hdaa1: at nid 1 on hdacc1 [1] random: unblocking device. [1] usbus0: 5.0Gbps Super Speed USB v3.0 [1] ugen0.1: <0x8086 XHCI root HUB> at usbus0 [1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [1] ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 [1] ses0: SEMB S-E-S 2.00 device [1] ses0: SEMB SES Device [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 [1] cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 [1] cd0: Removable CD-ROM SCSI device [1] cd0: Serial Number 0c23458789gLMNOP [1] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) [1] cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed [1] ada0: ACS-2 ATA SATA 3.x device [1] ada0: Serial Number W4Z0QWJ6 [1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [1] ada0: Command Queueing enabled [1] ada0: 1907729MB (3907029168 512 byte sectors) [1] ada0: quirks=0x1<4K> [1] ada0: Previously was known as ad4 [1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 [1] ada1: ACS-2 ATA SATA 3.x device [1] ada1: Serial Number Z340SZ92 [1] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) [1] ada1: Command Queueing enabled [1] ada1: 1907729MB (3907029168 512 byte sectors) [1] ada1: quirks=0x1<4K> [1] ada1: Previously was known as ad6 [1] SMP: AP CPU #1 Launched! [1] SMP: AP CPU #2 Launched! [1] SMP: AP CPU #3 Launched! [1] SMP: AP CPU #4 Launched! [1] SMP: AP CPU #6 Launched! [1] SMP: AP CPU #5 Launched! [1] SMP: AP CPU #7 Launched! [1] Timecounter "TSC-low" frequency 1800081130 Hz quality 1000 [1] GEOM_MIRROR: Device mirror/gmswap launched (1/1). [1] GEOM_MIRROR: Cannot add disk ada1p3 to gmswap (error=22). [1] GEOM_MIRROR: Cannot add disk gpt/swap-Z340SZ92 to gmswap (error=22). [1] GEOM_MIRROR: Cannot add disk gptid/049e8ee5-0ecf-11e4-90c2-001cc091bdda to gmswap (error=22). [1] Root mount waiting for: GMIRROR GMIRROR usbus0 [2] uhub0: 24 ports with 24 removable, self powered [3] Root mount waiting for: GMIRROR GMIRROR [4] Root mount waiting for: GMIRROR GMIRROR [5] GEOM_MIRROR: Force device gmrootfs start due to timeout. [5] GEOM_MIRROR: Device mirror/gmrootfs launched (2/3). [5] GEOM_MIRROR: Force device gmotherfs start due to timeout. [5] GEOM_MIRROR: Device mirror/gmotherfs launched (2/3). [5] Trying to mount root from ufs:/dev/mirror/gmrootfs [rw]... [6] Setting hostuuid: 820158f4-06fd-11de-879c-0011d8a408ed. [6] Setting hostid: 0x76f68519. [6] Entropy harvesting: interrupts ethernet point_to_point swi. [6] Starting file system checks: [6] /dev/mirror/gmrootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS [6] /dev/mirror/gmrootfs: clean, 38790243 free (1075963 frags, 4714285 blocks, 0.8% fragmentation) [6] /dev/mirror/gmotherfs: FILE SYSTEM CLEAN; SKIPPING CHECKS [6] /dev/mirror/gmotherfs: clean, 45488341 free (304397 frags, 5647993 blocks, 0.1% fragmentation) [6] Mounting local file systems:.